E 350 Van V8-7.3L DSL (1988)
Figure 2
7.
Loosely install a fabricated reinforcement strap under the cross member.
a.
Refer to Figure 2 for strap specifications and dimensions
b.
Start nuts and run up to the point where they will hold the reinforcement strap in place.
8.
Tighten the cross member-to-frame bolts and nuts to 65-70 lb.ft. (88-95 N-m).
9.
Tighten the transmission insulator nuts to 75-80 lb.ft. (102-108 N-m).
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION
DESCRIPTION
TIME
902317A
Install Cross member
1.1 Hr.
DEALER CODING
BASIC PART NO. CONDITION CODE
6A023
01
OASIS CODES:
703000, 305000, 504000
