E 350 Van V8-7.3L DSL (1988)
7.
Center horn switch on steering wheel and install attaching screws.
8.
Align steering column and flexible coupling as follows:
a.
Check for coupling pin to flange cutout clearance of .160 inch, adjusting as necessary.
b.
Torque flange coupling nuts to 14-21 ft. lbs., steering column to support bracket bolts to 19-27 ft. lbs., steering column floor opening cover
plate to dash panel bolts to 12-18 ft. lbs., and steering column opening cover clamp bolt to 12-18 ft. lbs.
9.
On models equipped with automatic transmission, attach shift linkage rod(s).
10.
On all models, connect battery ground cable.