E 350 Van V8-7.3L DSL Turbo VIN F (1995)
10
Top Cowl (Part of 2455)
INSTALLATION
1. Install brake master cylinder push rod spacer on brake pedal.
2. Slide spring washer and brake and clutch pedal bushings onto brake pedal and hold.
3. Position brake pedal and assembled parts up into support bracket.
4. Push bolt through bracket and brake pedal.
5. Install nut on long bolt.
6. Install stoplight switch, brake and clutch pedal bushing, and brake booster push rod onto pin on brake pedal.
7. Install spacer and pin retaining stoplight switch on brake pedal.
