E 350 Van V8-7.3L DSL Turbo VIN F (1995)
5. Remove the nuts retaining brake master cylinder to power brake booster. Remove the brake master cylinder from the power brake booster.
Item
Part Number
Description
1
2140
Brake Master Cylinder
2
2005
Power Brake Booster
3
2234
Brake Master Cylinder Outlet Tube
(Front)
4
2234
Brake Master Cylinder Outlet Tube
(Rear)
5
382984
Clamp
6
382802-S2
Nut
A
--
Tighten to 21-28 Nm
(16-21 lb ft)
INSTALLATION
1. Before installing the brake master cylinder, check the distance from the outer end of the booster assembly push rod, to the front face of the power
brake booster.
2. Using a shop fabricated gauge, adjust the power brake booster push rod so that the end is 24.89-25.27mm (0.980-0.995 in.) from the face of the
power brake booster.
Item
Part Number
Description
1
--
Shop Fabricated Gauge
