E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Vacuum Pump Switch: Service and Repair
Vacuum Hose Routing
NOTE: The distributor modulator valve (low vacuum) switch is mounted to the left side fender panel.
REMOVAL
1. Remove the negative battery cable from both batteries.
2. Disconnect vacuum hose and the electrical cable from distributor modulator valve switch.
3. Remove two attaching nuts and remove distributor modulator valve switch and A/C compressor mounting bracket (2882).
INSTALLATION
1. Reverse the above procedure for installation, Tighten nuts to 8-11 Nm (6-8 ft lb).
