ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Engine Coolant Temperature Sender <--> [Temperature Sensor (Gauge)] > < Engine Oil Temperature (EOT) Sensor <--> [Engine Temperature Sensor]|Description and Operation

E 350 Van V8-7.3L DSL Turbo VIN F (1995)

Page 1
background image

Engine Oil Temperature (EOT) Sensor: Service and Repair

REMOVAL

1. Disconnect engine oil temperature sensor electrical connector.

2. Approximately 0.94 liters (one quart) of engine oil must be removed prior to sensor removal. Remove one quart of engine oil from high pressure

oil pump reservoir using Rotunda Vacuum Tester 014-R1058 or equivalent.

3. Remove engine oil temperature sensor.

INSTALLATION

1. Install engine oil temperature sensor.
2. Connect engine oil temperature sensor electrical connector.
3. Fill engine oil to proper level.
4. Refill oil pump reservoir with engine oil.

Engine Coolant Temperature Sender <--> [Temperature Sensor (Gauge)] > < Engine Oil Temperature (EOT) Sensor <--> [Engine Temperature Sensor]|Description and Operation