E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Fan Blade: Testing and Inspection
WARNING: Do not operate engine until fan has first been inspected for cracks and/or separations. If a fan blade is found to be bent or
damaged in any way, do not attempt to repair or reuse damaged part. Proper balance is essential in fan assembly operation. Balance cannot be
ensured once a fan assembly has been found to be bent or damaged, and failure may occur during operation, creating an extremely dangerous
condition. Always replace damaged fan assembly.
-
Place fan on flat surface with leading edge facing down. If the clearance between the fan blade touching surface and the opposite blade is more
than 0.090 in (2 mm), replace the fan.
