E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Push Rod: Service and Repair
Left Side
REMOVAL
1. Disconnect both battery ground cables (14301).
Air Cleaner Assembly
2. Remove air cleaner assembly.
3. Discharge A/C system.
4. Disconnect electrical connectors from A/C system.
5. Disconnect manifold lines from A/C compressor.
6. Remove the four A/C compressor mounting bracket retaining bolts and remove the A/C compressor mounting bracket (2882) (with A/C attached).
7. Remove the interior engine cover.
8. Remove the intake duct tube assembly bolts and the clamps at the air cleaner. Remove the air inlet duct tube assembly.
9. Remove the oil fill tube.
10. Remove the intake duct bracket and retaining nuts.
11. Remove the crankcase breather screws and the breather assembly.
12. Remove the valve cover bolts.
13. Remove the valve cover.
14. Disconnect the electrical connectors from the fuel injectors and glow plugs.
15. Remove the valve cover gasket.
16. Remove the two rocker arm bolts (6A527)
