E 350 Van V8-7.3L DSL Turbo VIN F (1995)
9. Connect the engine harness electrical connectors to the valve cover gasket. Install the fuel injector harness clip.
10. Install the wiring harness retainer at the valve cover.
11. Install the tube mounting bracket and retaining nuts. Install the rear nut from inside the vehicle and install the front nut from outside the vehicle.
12. Install the engine oil level indicator tube retaining screw at the tube mounting bracket.
13. Install the alternator and the alternator retaining bolts. Tighten bolts to 40-55 Nm (30-40 ft lb).
14. Install the drive belt.
15. Connect the alternator electrical connectors.
16. Install air cleaner assembly.
17. Connect negative battery cable.
18. Start engine and check for leaks.
19. Install the interior engine cover.
