ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Right Side|Page 2228 > < Right Side|Page 2226
Page 1
background image

Valve Cover: Service and Repair
Left Side

REMOVAL

1. Disconnect battery ground cable (14301).

Air Cleaner Assembly

2. Remove air cleaner assembly.
3. Discharge A/C system.
4. Disconnect electrical connectors from A/C system.
5. Disconnect manifold lines from A/C compressor.
6. Remove the four A/C compressor mounting bracket retaining bolts and remove the A/C compressor mounting bracket (2882) (with A/C attached).
7. Remove the interior engine cover.
8. Remove the intake duct tube assembly bolts and the clamps at the air cleaner. Remove the air inlet duct tube assembly.
9. Remove the oil fill tube.

10. Remove the intake duct bracket and retaining nuts.
11. Remove the crankcase breather screws and the breather assembly.
12. Remove the valve cover bolts.
13. Remove the valve cover.
14. Disconnect the electrical connectors from the fuel injectors and glow plugs.

15. Remove the valve cover gasket.

INSTALLATION

1. Install the valve cover gasket.

Right Side|Page 2228 > < Right Side|Page 2226