E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Fuel Line Coupler: Service and Repair
Disconnecting and Connecting
DISCONNECT
1. Release fuel system pressure.
2. Remove retaining clip from spring lock coupling by hand only. Do not use any sharp tool or screwdriver as it may damage the spring lock
coupling.
3. Twist fitting to free it from any adhesion at the O-ring seals.
4. Using Spring Lock Coupling Disconnect Tool T81P-19623-G1, or G2, disconnect coupling as follows:
a. Fit tool to coupling so tool can enter cage to release garter spring.
b. Push the tool into the cage opening to release female fitting from garter spring.
c. Pull the coupling male and female fittings apart, with the tool still attached.
d. Remove the tool from the coupling.