ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Remove, Repair, and Install|Page 3752 > < Remove, Repair, and Install|Page 3750
Page 2
background image

Rear Fuel Lines

CAUTION:  Fuel lines cannot be repaired if damaged, the component must be replaced.

CAUTION:  Plastic fuel tube must not be repaired using hose and hose clamps. Push connect fittings cannot be repaired except to replace the retaining
clips. Should the plastic tubes, push connect fittings or mating tube ends become damaged and leak, approved service parts must be used to service the
fuel lines.

CAUTION:  The fuel lines can be damaged by torches, welding sparks, grinding and other operations which involve heat and high temperatures. If any
repair or service operation will be used which involves heat and high temperatures, locate all fuel system components, especially the plastic fuel lines to
be certain they will not be damaged. It is recommended that the plastic fuel tubes be removed from the vehicle if a torch or high heat producing
equipment is to be used for service in the following areas:

1. Exhaust or suspension components in proximity to fuel tubes.
2. Underbody frames, rails and crossmembers (left side).
3. Dash panel, under vehicle or inside the passenger compartment (lower left side).

Remove, Repair, and Install|Page 3752 > < Remove, Repair, and Install|Page 3750