E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Seat Belt: Description and Operation
FRONT LAP/SHOULDER SEAT BELT
On bench seat installations, the inboard belts with the buckle are attached to the seat. On Econoline bucket seats and captain's chairs, the inboard
buckles are attached to the floor. Attaching the tongue and buckle secures the occupant with both lower and upper restraints.
CENTER LAP SEAT BELT
The center seat belts do not have retractors. To lengthen the belt, tip the tongue at a right angle to the belt, and pull the tongue until the ends can be
joined with front safety belt buckle end or rear safety belt and buckle over the lap.
To fasten the belt, insert the tongue into the open end of the front safety belt buckle or rear safety belt and buckle until a snap is heard. To shorten the
belt, pull on the loose end of the webbing. The lap belt should be snug across the hips, NEVER ACROSS THE WAIST.
REAR LAP/SHOULDER SEAT BELT
All of the rear outboard seats are provided with shoulder belts. Some outboard seat positions may be equipped with belts detachable from their seat
anchors. Center seating positions are provided with adjustable lap belts only.