E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Main Light Switch: Service and Repair
REMOVAL AND INSTALLATION
1. Remove engine cover.
2. Remove ash tray retainer attaching screws, then remove retainer.
3. Remove steering column center and left snap molding.
4. Remove cigar lighter element.
Headlamp Switch
5. Remove headlamp switch knob and shaft by inserting a hooked tool into knob slot to depress spring, Fig. 2.
6. Unscrew bezel from instrument panel finish panel.
7. Remove steering column opening cover attaching screws, then the cover.
8. Remove 6 screws and steering column lower reinforcement.
9. Remove instrument cluster finish panel attaching screws.
10. Pull finish panel rearward, unsnap panel retainers, then disconnect panel electrical connectors.
11. Remove headlamp control shaft by depressing release button on switch housing with shaft in full On position, then pull shaft from switch.
12. Remove switch attaching nut, remove switch, then disconnect switch electrical connector.
13. Reverse procedure to install.
