ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Suspension Spring ( Coil / Leaf )|Rear|Page 7122 > < Suspension|Service and Repair|Page 7117
Page 1
background image

Suspension Spring ( Coil / Leaf ): Service and Repair
Rear

REMOVAL AND INSTALLATION

1. Raise rear of vehicle and support at frame. Support axle with a suitable jack.
2. Disconnect shock absorbers from lower mountings.
3. Remove two U-bolts and the U-bolt plate.
4. Lower axle assembly and remove upper and lower rear shackle bolts, then pull rear shackle assembly from bracket and spring.
5. Remove spring mounting nut and bolt, then lower spring assembly from vehicle.
6. Lower axle assembly and remove spring front bolt from hanger. Remove two attaching bolts from rear of spring, then lower spring assembly from

vehicle.

6. Reverse procedure to install.

Suspension Spring ( Coil / Leaf )|Rear|Page 7122 > < Suspension|Service and Repair|Page 7117