ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Band Apply Servo, A/T|Service and Repair > < Band, A/T|Specifications|Page 4272
Page 1
background image

Band Apply Servo: Technical Service Bulletins
A/T - E4OD Redesigned Intermediate Band Apply Servo

Article No.
95-23-14

11/20/95

TRANSMISSION - E4OD - NEW DESIGN 
INTERMEDIATE BAND APPLY SERVO ASSEMBLY

LIGHT TRUCK: 
1989-96 BRONCO, ECONOLINE, F SUPER DUTY, F-150-350 SERIES

ISSUE: 
All E4OD transmissions built after August 7, 1995 have a new design Intermediate Band Apply Servo Assembly (F6TZ-7D021-A). This new design will
service all past and present model E4OD transmissions.

ACTION: 
When replacement of the Intermediate Band Apply Servo Assembly becomes necessary, either design (previous or new) can be used. Some
transmissions built after August 7, 1995 do not have the retaining ring groove in the piston bore and only the new design piston and seal assembly can be
used. Refer to Figure 1.

CAUTION

WHEN USING THE NEW DESIGN PISTON AND SEAL ASSEMBLY, DO NOT USE THE PISTON ASSEMBLY RETAINER OR
RETAINING RING.

PART NUMBER

PART NAME

F6TZ-7D021-A

Intermediate Band Apply Servo Assembly

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 504000

Band Apply Servo, A/T|Service and Repair > < Band, A/T|Specifications|Page 4272