E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Exploded View Of Forward Clutch
NOTE: Refer to the Exploded View Of Forward Clutch image when performing the following procedure.
Needle Bearing Assembly Replacement
1. Remove needle bearing assembly from inner face of cylinder.
2. Remove needle bearing assembly No. 7F374.
3. Remove both Teflon seal rings No. 7F078 from grooves.
4. Remove snap ring, then the front pressure plate.
5. Remove clutch pack, cushion spring, and rear pressure plate.
NOTE: Clutch pack may consist of 3 or 4 plates, depending on model. Tag parts for assembly reference.
6. Remove return spring snap ring, then the return spring.
7. Remove steel ring from piston groove.
