ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Parking Pawl, A/T > < Output Shaft Hub and Ring Gear|Page 4466
Page 1
background image

Output Shaft Bearing/Bushing: Technical Service Bulletins
A/T - E40D Revised Rear Case Bushing

Article No.
95-11-12

06/05/95

TRANSMISSION - E4OD - REVISED REAR CASE BUSHING

LIGHT TRUCK: 
1989-95 BRONCO, ECONOLINE, F SUPER DUTY, F-150-350 SERIES

ISSUE: 
A revised design transmission rear case bushing has been released for servicing the E40D transmission. The revised bushing incorporates one (1)
lubrication groove on the bushing I.D. to supply additional lubrication to the No. 13 park gear thrust washer.

ACTION: 
Always replace both front and rear case bushings when servicing the transmission if either case bushing is damaged and/or the No. 13 park gear thrust
washer is heat stained or worn. Follow the case bushing replacement procedure as outlined in Section 07-01A of the appropriate Service Manual.

Parts Block

Parts Block

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 504000

Parking Pawl, A/T > < Output Shaft Hub and Ring Gear|Page 4466