ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Torque Converter:|02-21-1 > < A/T - Torque Converter Access Plug Dislodges|Page 4604
Page 1
background image

Torque Converter: All Technical Service Bulletins
A/T - Driveline Vibration W/Converter Engaged

Article No.
03-21-18

10/06/03

^

VIBRATION - DRIVELINE RESONANCE/VIBRATION
BETWEEN 1400 AND 2000 RPM WITH CONVERTER
CLUTCH ENGAGED DURING MEDIUM TO HEAVY
THROTTLE CONDITIONS - VEHICLES WITH 7.3L DI
TURBO ENGINE AND TRANSMISSION BUILT PRIOR
TO 11/13/95 (5L13)

^

TRANSMISSION - E40D - DRIVELINE
RESONANCE/VIBRATION BETWEEN 1400 AND 2000
RPM WITH CONVERTER CLUTCH ENGAGED
DURING MEDIUM TO HEAVY THROTTLE
CONDITIONS - VEHICLES WITH 7.3L DI TURBO
ENGINE AND TRANSMISSION BUILT PRIOR TO
11/13/95 (5L13)

FORD: 
1995-1996 E-350, F-250 CREW CAB, F-350 CREW CAB

Article 96-26-21 is being republished in its entirety as part of a consolidated 7.3L diagnostic aid booklet.

ISSUE

Some vehicles with transmissions built prior to 11/13/95 (5L13) may exhibit a driveline resonance/vibration between 1400 and 2000 RPM with the
torque converter clutch engaged. This may be caused by the torque converter.

ACTION

Prior to torque converter replacement, refer to the following Service Procedure for details to verify conditions.

SERVICE PROCEDURE

1.

Verify the resonance/vibration does not occur in neutral and is most noticeable between 1400 and 2000 RPM with the converter clutch engaged
during medium to heavy throttle conditions. Also watch for the vibration to diminish at engine speeds lower than 1400 and higher than 2000 RPM.
If the concern meets all of these conditions and the transmission has a built date prior to 11/13/95 (5L13), replace the torque converter. Refer to
the appropriate Service Manual for removal and installation procedures.

2.

If the vibration concerns do not meet the conditions, check for non-factory installed items that could affect driveline and verify proper installation.
Also refer to the appropriate Service Manual, Section 05-00 for diagnosis and testing.

PARTS BLOCK

OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 96-26-21
WARRANTY STATUS: INFORMATION ONLY

Disclaimer

All Technical Service Bulletins for Torque Converter:|02-21-1 > < A/T - Torque Converter Access Plug Dislodges|Page 4604