E 350 Van V8-7.3L DSL Turbo VIN F (1995)
Valve Body: Service and Repair
Disassembly and Assembly
With C6
DISASSEMBLY
CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean
automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with
petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.
Upper And Lower Valve Bodies Disassembled
1. Remove screen from lower valve body.
2. Separate upper and lower valve bodies, and remove separator plate and gasket.
3. Remove manual valve retaining pin from upper valve body.