E 450 V10-6.8L (2008)
-
To install, tighten to 10 Nm (89 lb-in).
4. Through the front fender wheel well, remove the inner screw.
-
To install, tighten to 10 Nm (89 lb-in).
5. Remove the lower rear fender screw and shims.
-
To install, tighten to 10 Nm (89 lb-in).
6. Remove the lower front fender-to-fender mounting bracket screw.
-
To install, tighten to 10 Nm (89 lb-in).
7. Remove the front fender upper screws and the front fender.
-
To install, tighten 10 Nm (89 lb-in).
8. To install, reverse the removal procedure.
