E 450 V10-6.8L (2008)
Arm Rest: Service and Repair
Seat Armrest - Rear, Bucket
SEAT ARMREST - REAR, BUCKET
Removal and Installation
1. Release the hook-and-loop at the rear of the armrest trim cover and partially invert to access the armrest bolt.
2. Remove the armrest bolt and armrest.
-
To install, tighten to 35 Nm (26 lb-ft).
3. Remove the shim.
-
To install, position the shim to the armrest stop post.
4. To install, reverse the removal procedure.