E 450 V10-6.8L (2008)
13. Remove the front seat backrest.
1. Remove the pivot bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
2. Pull the lumbar cable through the seat cushion.
3. Lift and remove the backrest assembly.
14. To install, reverse the removal procedure.
Seat Backrest - Rear, Bucket
SEAT BACKREST - REAR, BUCKET
Removal and Installation
1. Insert an appropriate tool into the slot and release the detachable safety belt anchor from the seat.
2. Remove the seat.
-
Pull the seat latch release handle, slide the seat to the right and disengage from the seat latch striker.