E 450 V10-6.8L (2008)
LH seat
3. Remove LATCH attachment assembly.
1
To install, tighten to 25 Nm (18 lb-ft).
2
Release the 2 lower J-clips.
3
Remove the LATCH attachment assembly.
4. Remove the 4 nuts and pedestal.
-
To install, tighten to 25 Nm (18 lb-ft).
RH seat
5. NOTE: The anti-rotation tab must be correctly aligned for correct installation.
Remove the bolt and detachable safety belt anchor.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the locator spacer.
All seats
6. Remove the 3 screws and LH cushion side shield.
7. Remove the 3 screws and RH cushion side shield.
RH seat
8. Position the seat forward on the seat track and remove the 4 seat track-to-cushion bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
LH seat
9. Remove the 4 seat riser-to-cushion frame bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
