E 450 V10-6.8L (2008)
Fluid Pan: Service and Repair
4R70E/4R75E - Automatic Transaxle/Transmission
Fluid Pan, Gasket and Filter
Removal
CAUTION: Do not use any supplemental transmission fluid additives or cleaning agents. The use of these products could cause internal
transmission components to fail; this will effect the operation of the transmission.
Use of a transmission fluid other than specified could result in transmission failure.
NOTE: Normal maintenance requires periodic transmission fluid changes. If a major repair, such as a clutch, band, bearing, etc., is required, the
automatic transmission will need to be removed for repair. The transmission fluid needs to be changed if evidence of transmission fluid contamination
is found.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain transmission fluid.
^
Loosen the transmission fluid pan bolts and allow transmission fluid to drain. After transmission fluid is drained, remove the bolts.
3. Remove the transmission fluid pan and transmission fluid pan gasket.
4. Pull down evenly and remove the transmission fluid filter and seal.
