E 450 V10-6.8L (2008)
2. Install the parking lever actuating rod.
1) Install the parking lever actuating rod.
2) Install the manual valve detent lever.
3. Install the manual control lever shaft.
1) Install the manual control lever shaft.
2) Install the manual control lever shaft inner nut.
^
Tighten to 31 Nm (23 lb-ft).
3) Install the manual control lever shaft retaining pin.
4. Install the manual control valve detent lever spring and bolt.
^
Tighten to 10 Nm (89 lb-inch).