E 450 V10-6.8L (2008)
15. Install the transmission fluid cooler tubes in the front and rear transmission fluid cooler tube case fittings.
^
Tighten to 40 Nm (30 lb-ft).
All engines
16. Install the lower air deflector and the screws.
17. Install the splash shield and the pushpin retainers.
18. CAUTION: Use only MERCON(R) SP Transmission Fluid to service TorqShift transmissions. Using MERCON(R) V in a TorqShift
transmission may cause transmission damage. Use of any fluid other than the recommended fluid can cause transmission damage.
Fill the transmission with the specified type and quantity of transmission fluid.
