E 450 V10-6.8L (2008)
6. Position the driveshaft flange yoke on the pinion flange with the index marks aligned and install the 4 driveshaft-to-pinion flange bolts in the
sequence shown.
^
Tighten to 112 Nm (83 lb-ft).
6. Position the driveshaft flange yoke on the pinion flange with the index marks aligned and install the 4 driveshaft-to-pinion flange bolts in the
sequence shown.
^
Tighten to 112 Nm (83 lb-ft).