E 450 V10-6.8L (2008)
Slip Yoke: Service and Repair
Driveshaft Slip Yoke
Disassembly
1. CAUTION: Do not, under any circumstance, clamp the driveshaft in the jaws of a vise or similar holding fixture. Denting or localizing
fracture can result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench. Do not damage the tubes.
2. Remove the slip-yoke from the driveshaft.
1) Cut and discard the slip-yoke boot clamps.
2) Remove the slip-yoke from the driveshaft.