E 450 V8-6.0L DSL Turbo (2007)
Brake Caliper: Service and Repair
Brake Caliper Support Bracket, Rear
Brake Caliper Support Bracket - E-450
Brake Caliper Support Bracket - E-450
Removal and Installation
1. Remove the brake disc.
2. Remove the brake disc shield bolts.
^
To install, tighten to 8 Nm (71 inch lbs).
3. Remove the 5 brake caliper support bracket nuts and remove the bracket.
^
To install, tighten to 118 Nm (87 ft. lbs).
4. To install, reverse the removal procedure.
