E 450 V8-6.0L DSL Turbo VIN P (2004)
4. Lower the window glass to gain access to the two glass bracket retaining rivets.
5. CAUTION: Do not attempt to pry out the rivets, as damage to the front door window glass can result. Prior to removing the rivet center
pins, it is recommended that a suitable block support be placed between the front door outer panel and the glass bracket to stabilize the
glass during rivet removal.
Remove the center pins from the rivets, using a drift. Using 1/4-inch diameter drill, drill out the remainder of the rivets.
6. Lift up and rotate the front door window glass clockwise, and remove.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Use the Heavy Duty Riveter to install the rivets.
