E 450 V8-6.0L DSL Turbo VIN P (2004)
2. Install the disc brake caliper and the front brake hose.
1
Position the disc brake caliper in the front disc brake caliper anchor plate.
2
Install and tighten the disc brake caliper bolts.
3
Using new copper washers, install the front brake hose and the bolt.
3. Attach the speed sensor wiring to the front brake hose.
4. Bleed the brake system.
5. Install the wheel and tire assembly.
6. Inspect the brake system operation.
E-150
Brake Caliper-E-150
Material
Disassembly
1. Remove the disc brake caliper.
2. Drain brake fluid from the disc brake caliper.
3. Secure the disc brake caliper in a vise.
