E 450 V8-6.0L DSL Turbo VIN P (2004)
4. Disconnect the power steering fluid return hose.
5. Remove the brake master cylinder.
6. Disconnect the brake booster push rod.
1
Remove the stoplamp switch self-locking pin.
2
Remove the stoplamp switch.
3
Remove the brake booster push rod bushing.
4
Disconnect the brake booster push rod from the brake pedal pin.
7. Remove the brake booster nuts.
8. Remove the brake booster.
9. To install, reverse the removal procedure.
-
Bleed the Hydro-Boost system.