E 450 V8-6.0L DSL Turbo VIN P (2004)
Intake Manifold: Service and Repair
Part 2 of 2
Intake Manifold Continued
Installation
All vehicles
1. NOTE: The locating tabs on the gaskets must be positioned upward and toward the center of the engine, or a leak will occur.
Install the intake manifold gaskets. Install a new front module O-ring seal.
2. Install the intake manifold and bolts and tighten in this sequence.
1. Loosely install bolts 1-8.
2. Tighten bolts 9-16 to 11 Nm (8 ft. lbs.).
3. Tighten all bolts to 11 Nm (8 ft. lbs.).
