E 450 V8-6.0L DSL Turbo VIN P (2004)
14. Remove the bolts and the front cover.
15. CAUTION: Sealant is used where the crankcase and lower crankcase meet. Failure to cut the sealant could result in pulling the lower crankcase
seal out while removing the front cover gasket.
Use a thin blade scraper to cut the sealant where the crankcase and the lower crankcase meet. Remove and discard the front cover gasket.
^
Clean and inspect the sealing surfaces.
Installation
All vehicles
1. If removed, install the front cover crankcase dowels into the cylinder block.
2. NOTE: Use guide studs to aid in installation. Studs must be fabricated locally.
Install the guide studs.
