E 450 V8-6.0L DSL Turbo VIN P (2004)
7. NOTE: Do not spill any remaining coolant or refrigerant oil while removing the air conditioning and heater assembly.
Remove the air conditioning and heater assembly.
1
Remove the screws.
2
Remove the air conditioning and heater assembly.
INSTALLATION
1. To install, reverse the removal procedure.
-
Lubricate the coolant hoses using plain water, if needed.
-
Install new O-ring seals lubricated in clean mineral oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the refrigerant system.
3. Fill the engine cooling system.