E 450 V8-6.0L DSL Turbo VIN P (2004)
Coolant: Fluid Type Specifications
ENGINE COOLANT
Add Motorcraft Premium Gold Engine Coolant (yellow-colored), VC-7A (U.S., except CA, OR and NM), VC-7B (CA, OR and NM), meeting Ford
Specification WSS-M97B51A1.
NOTE: Use of Motorcraft Cooling System Stop Leak Pellets, VC-6, may darken the color of Motorcraft Premium Gold Engine Coolant from yellow
to golden tan.
Do not add/mix an orange-colored, extended life coolant such as Motorcraft Specialty Orange Engine Coolant, VC-2 and VC-3 (US) or
CXC-209 (Canada), meeting Ford specification WSS-M97B44D with the factory-filled coolant. Mixing Motorcraft Specialty Orange Engine
Coolant or any orange-colored extended life product with your factory filled coolant can result in degraded corrosion protection.
A large amount of water without engine coolant may be added, in case of emergency, to reach a vehicle service location. In this instance, the cooling
system must be drained and refilled with a 50/50 mixture of engine coolant and distilled water as soon as possible. Water alone (without engine
coolant) can cause engine damage from corrosion, overheating or freezing.
Do not use alcohol, methanol, brine or any engine coolants mixed with alcohol or methanol antifreeze (coolant). Alcohol and other liquids can cause
engine damage from overheating or freezing.
Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the engine coolant.
WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly.
Also, you can be burned if you spill coolant on hot engine parts.
WARNING: Do not put engine coolant in the windshield washer fluid container. If sprayed on the windshield, engine coolant could make it difficult
to see through the windshield.
