E 450 V8-6.0L DSL Turbo VIN P (2004)
Pressure Feedback Exhaust Sensor: Service and Repair
Differential Pressure Feedback Exhaust Gas Recirculation (EGR) System
DIFFERENTIAL PRESSURE FEEDBACK EXHAUST GAS RECIRCULATION (EGR) SYSTEM
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the differential pressure feedback exhaust gas recirculation (EGR) system.
1
Disconnect the electrical connector.
2
Disconnect the hoses.
3
Remove the bolts (nuts if applicable).
INSTALLATION
1. To install, reverse the removal procedure.
