E 450 V8-6.0L DSL Turbo VIN P (2004)
Fuel Line Coupler: Service and Repair
Push Connect Fittings
PUSH CONNECT FITTINGS
Fuel Line Removal Tool
SPECIAL TOOL(S)
DISCONNECT
WARNING:
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and can be ignited, resulting in possible personal injury.
-
Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the
fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal
injury or a fire hazard.
1. Release the fuel pressure.
2. Disconnect the safety clip from the male hose.
3. Install the fuel tube disconnect tool and push into the fitting.
