E 450 V8-6.0L DSL Turbo VIN P (2004)
SAFETY BELT TONGUE ROTATED ON BELT
1. Grasp the belt tongue and pull down on the closest belt webbing to form a loop through the upper (narrower and longer) slot in the tongue.
2. Working within the upper slot, rotate and fold the belt webbing over itself as required to remove the twist.
3. Pull the excess belt webbing back through the upper slot in the tongue.
4. Repeat Steps 1-3 to complete the removal of the twist at the lower (wider and larger) slot in the tongue.
5. When completed, the safety belt should look like the illustration.
Deployed
SAFETY BELT PRETENSIONER DISPOSAL - DEPLOYED
1. WARNING: The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle
and when handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical
