E 450 V8-6.0L DSL Turbo VIN P (2004)
Starter Motor: Service and Repair
STARTER MOTOR
REMOVAL
WARNING: When carrying out maintenance on the starting system, be aware heavy gauge leads are connected to the battery. Make sure
protective caps are in place when maintenance is complete.
1. With the vehicle in NEUTRAL position it on a hoist.
2. NOTE: The 6.0L diesel uses two frame mount batteries. The ground path is through the frame.
Disconnect the battery ground cable.
3. Remove the retaining nut and position the cable bracket aside.
4. Remove the starter solenoid protective cap.
5. Disconnect the starter motor electrical connections.
