E 450 V8-6.0L DSL Turbo VIN P (2004)
3. Using the special tools, remove the axle pivot bushing.
Installation
1. CAUTION: The new pivot bushing must be free of grease, oil or other contamination.
Position the new pivot bushing.
^
NOTE: The flanged end of the pivot bushing faces the front of the vehicle.
Position the special tools and the new pivot bushing on the front axle.
2. Press the new pivot bushing into the front axle, leaving the specified clearance between the pivot bushing flange and the front axle.
3. Position the front axle, bolt and nut into the pivot bracket. Tighten the nut hand-tight.
4. Install the front coil spring.
