E 450 V8-6.0L DSL Turbo VIN P (2004)
Suspension Spring ( Coil / Leaf ): Service and Repair
Coil Spring
Spring
Removal and Installation
1. Remove the stabilizer bar.
2. CAUTION: The axle must be supported throughout the procedure to prevent strain on the front brake hose.
Use a suitable jack to support the affected front axle.
3. Remove the nut and disconnect the shock absorber.
4. Remove the bolt and the upper spring retainer.
5. Lower the jack supporting the front axle and remove the front coil spring.
6. To install, reverse the removal procedure.