E 450 V8-6.0L DSL Turbo VIN P (2004)
1. Assemble the main control valve body.
1. Install the pressure control solenoid (PC-A) and install the (E) retaining clip.
2. Push the bulkhead connector through the solenoid body and twist the bulkhead connector locking it into place
3. Install the shift solenoid (SSPC-C) back into place and install the (E) retaining clip.
4. Connect the electrical connectors to the pressure control solenoid (PC-A) and the shift solenoid (SSPC-C).
5. Install the wire harness to solenoid body and tighten the bolts.
2. Remove the solenoid body electrical connector O-ring seal.
3. Install the transmission main control valve body.