E 450 V8-6.0L DSL Turbo VIN P (2004)
9. Lower the transmission onto the rear mount and install the bolts.
Vehicles equipped with a transmission-mounted parking brake
10. Install the transmission-mounted parking brake.
1. Install a new transmission-mounted parking brake gasket.
2. Keeping the vent in an upward position, install the transmission-mounted parking brake assembly.
3. Install the transmission-mounted parking retaining bolts.
11. Connect the transmission-mounted parking brake linkage.
1. Compress the spring on the actuating cable and install the cable into the cable housing.
2. Install the actuating cable end onto the actuating lever and install the pin.
3. Install the hair pin retaining clip into the pin.
4. Connect the return spring to the pin.
Vehicles equipped with a fixed yoke