E 450 V8-6.0L DSL Turbo VIN P (2004)
11. CAUTION: Prevent the front of the valve body separator plate from sagging and displacing the check balls.
If the valve body separator plate is not being repaired:
1. Remove the bolt.
2. Install bolt into any case threaded bolt hole on the opposite end of the separator plate.
12. NOTE: Do not remove the lower-to-upper main control valve body assembly retaining bolts. Keep the main control valve bodies attached as an
assembly.
Remove the main control valve body.
1. Do not remove the lower-to-upper main control valve body bolts.
13. Remove the solenoid body assembly.
1. Remove the bolts.
2. Remove the nut.
3. Remove the solenoid body assembly.