E 450 V8-6.0L DSL Turbo VIN P (2004)
15. Position the differential assembly, including the differential bearing cups and differential bearing shims in the differential housing. Tighten bearing
caps to specification.
16. Position the special tool.
1. Rotate the differential case to verify that the differential bearings have seated correctly.
2. Position the special tool.
17. Measure the differential case runout.
^
If the runout does not exceed the specification, use the new differential bearings for assembly.
^
If the runout exceeds the specification, install a new differential case.
Installation
All axles
1. Position the differential ring gear, the anti-lock speed sensor ring, and the differential case. Align the bolt holes by starting two bolts through the
holes in the differential case and the differential ring gear. Press the new anti-lock speed sensor ring, if removed, and the differential ring gear on
the differential case.
2. Install the bolts.