E 450 V8-6.0L DSL Turbo VIN P (2004)
15. From inside the rear axle housing, install the drive pinion assembly (drive pinion, shims, rear bearing, and drive pinion collapsible spacer) into the
rear axle bore.
16. Lubricate the pinion flange splines with rear axle lubricant.
17. NOTE: Disregard the scribe marks if a new pinion flange is being installed.
Align the pinion flange with the drive pinion shaft.
18. With the drive pinion in place in the rear axle housing, install the pinion flange using the special tool.
19. Position the new pinion nut.
