Econoline E150 1/2 Ton V6-4.2L VIN 2 (1998)
4. Install the rear brake shoes and linings.
1
Position the rear brake shoes and linings
2
Install the brake shoe hold-down spring pins and the brake shoe hold-down springs
5. Install the parking brake strut.
1
Install the parking brake link spring and the parking brake spring retainer on the parking brake strut.
2
Install the parking brake strut.
3
Install the brake shoe anchor pin guide plate.
6. Install the short brake shoe retracting spring.
1
Place the brake shoe adjusting lever cable over the anchor pin, with crimped side in.
2
Install the short brake shoe retracting spring.
7. Install the long brake shoe retracting spring.
1
Install the cable guide.
2
Position the brake shoe adjusting lever came in the cable guide groove.
3
Install the long brake shoe retracting spring
NOTE: Make sure the brake shoe adjusting lever cable is positioned in the cable guide groove.