ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hydraulic Assembly|Page 5508 > < Hydraulic Assembly
Page 2
background image

4. Tighten the RH rear bleeder screw, and disconnect the waste line.

5. Repeat Steps 2, 3 and 4 for the LH rear bleeder screw, the RH front disc brake caliper bleeder screw, and the LH front disc brake caliper bleeder

screw, in that order.

6. Connect the NGS DCL cable adapter into the vehicle data link connector (DLC) under the dash, and follow the NGS instructions.
7. Repeat the system bleed procedure as outlined in Steps 1 through 5.

Replacement

REMOVAL

WARNING:  BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH
HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15
MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE
VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

1. Disconnect the battery ground cable.

Hydraulic Assembly|Page 5508 > < Hydraulic Assembly